顯示具有 Motorized Excavator 標籤的文章。 顯示所有文章
顯示具有 Motorized Excavator 標籤的文章。 顯示所有文章

2017年6月19日 星期一

Motorized Excavator with Independently Power Undercarriage & SBrick

The original tracks were powered by two motors in the upper parts of the excavator, through a series of gears.  With power losses through transmission, the tracks moved very slow and didn't want to move when the batteries were half drained.  

As I am using two SBricks, I place one SBrick in the carriage with two motors and battery case.  The tracks are now independently powered regardless, moving smoothly and a little bit faster than I expected.  By separating the upper part and undercarriage, I don't need to replace the batteries so often.


I also modified the SBrick control panel designed by Jurgen.  The original design was to use two sliders to control the forward and backward movement of the tracks.  Due to sensitivity of the control, it was difficult to synchronize the movement.   I replaced the sliders with a joystick in the middle, turning it by 45 degree.  By moving the spot up, both tracks are moving forward.  By moving the spot to left, the left track is moving backward while the right track moving forward making a left turn.  It is easier to control the travel of the excavator now and can have several movements at the same time.





2017年6月14日 星期三

Motorized Excavator with Infrared Remote Control & SBrick

An excavator has six actions: left and right tracks, slewing, boom, stick and bucket.   The original model has only two sets of IR remote control, controlling four motors.  Out of cost control or other reasons, the designer cleverly used the fourth motor as a switch.  The other three motors controlled the left, right track and slewing, by switching the fourth motor, the other three motors were then controlling the boom, stick and bucket.

Of course, some of the enthusiasts would definite not happy about this arrangement and started their own modifications.   Jurgens' modification, using three set of IR remote control and six motors were widely adopted by many people.   You would require to purchase an extra of 180 pirces of parts and power function components to complete the modifications.

Motorized Excavator 8043

This motorized excavator was originally modified by Jurgens. 

Three IR receivers, six motors and one battery case were tightly squeezed into the back of the excavator.

Left controller to control the slewing and stick, right controller to control the boom and bucket.

Middle controller, upside down to control the left and right tracks
Ultimate 8043s

Two SBricks replaced three IR receivers.




SBrick control panel designed by Jurgens.